This toner refill kit is used to refill the cartridge found primarily in the Minolta SP-101, Epson EPL-7000/8100, NEC Silent Writer 95/50 360g.

This toner refill kit is used to refill the cartridge found primarily in the Minolta SP-302 and the Lexmark Optra E 85g.

This toner refill kit is used to refill the cartridge found primarily in the Minolta Sp-6, SP-6X engine used in the Epson 1000/1500/1600 200g.

This toner refill kit is used to refill the cartridge found primarily in the Minolta Pageworks 20 and QMS 2060 310g.

This toner refill kit is used to refill the cartridge is most frequently found in the Mita CC-10 black toner 100g.

This toner refill kit is used to refill the cartridge is most frequently found in the Mita LDC-550 black toner 720g.

This toner refill kit is used to refill the cartridge is most frequently found in the Mita LDC-750 toner kit.

This toner refill kit is used to refill the toner cartridge found primarily in the NEC LC-800 200g TK.

This toner refill kit is used to refill the cartridge found primarily in the original Super Script 660/860 200g.

This toner refill kit is used to refill the toner cartridge found primarily in the NEC Nefax-790 300g.

This toner refill kit is used to refill the toner cartridge found primarily in the Samsung ML-6060 and the NEC SS-1400 190g.

This toner refill kit is used to refill the cartridge found primarily in the Samsung ML 7000 series printer and the NEC SS-1800.

This toner refill kit is used to refill the toner cartridge found primarily in the Minolta Pageworks 8 NEC SS-870 185g.

This toner refill kit is used to refill the cartridge is most frequently found in the Okidata OL-1200 180g. OkidataOL-1200 OPC Okidata OPC Cartridge Part # 56118801 OEM Stated Yield: 30,000 (The procedure for these machines is the same as used for the Okidata OL-400e, and OP-20) Turn off the printerWhile holding the MENU1/MENU2 button down, turn the printer back on. Keep holding the button down until you see USER MNT on the display panel. Release the button.Press the MENU1/MENU2 button three times. The display will read DRUM CTR RESET. Press the ENTER button. The display will read WARMING UP, and finally ON LINE. The counter is reset!

This toner refill kit is used to refill the cartridge is most frequently found in the Okidata OL-400/800 toner black 100g. Okidata OL-400 / 800 OPC Okidata OPC cartridge part # 56106601 OEM Stated Yield: 15,000 Although all of these machines use the same cartridge, the reset procedures are different. Reset procedure for the Okidata OL-800 Series Printers Turn off the printerWhile holding the MENU1/MENU2 button down, turn the printer back on. Keep holding the button down until you see "MAINTENANCE MODE" on the display panel. Release the button. Press the MENU1/MENU2 button three times. The display will read "DRUM COUNT RESET". Press the ENTER/QUIET button. The display will read "DRUM COUNT RESET RESETTING", then "INITIALIZING", then "WARMING UP", and finally "ON LINE". The counter is reset! Reset procedure for all other OL series Laser Printers Turn the printer off. Press and hold the RESET button (not the Menu Reset), and turn the printer on. Hold the button down until you see "DRUM RESET" on the display. Release the button. Run a self-test. Turn the printer off-line and press the PRINT FONT/SELF TEST button once and release. The printer will print out a page with the installed fonts, and the page count of the printer. Reset procedure for the "DOC-IT" Document Processing Systems Turn the DOC-IT on, and re-initialize it: either re-boot the computer, or type DOCIT at the DOS prompt and press enter. Press and hold the ENTER key for 3 seconds, when you release it you should see "Administration" on the display. Press the down arrow key until you see: Reset drum ctr? YES/NO Press the left arrow key to move the check mark next to "YES". Then Press ENTER. Press any key to leave the Administration menu. The counter is reset!

This toner refill kit is used to refill the cartridge is most frequently found in the Okidata OL-400e 60g. Okidata OL-400E OPC Okidata OPC Cartridge Part # 56116801 OEM Stated Yield: 20,000 (The procedure for these machines is the same as used for the Okidata OL-1200, OP-20) Turn off the printerWhile holding the MENU1/MENU2 button down, turn the printer back on. Keep holding the button down until you see USER MNT on the display panel. Release the button.Press the MENU1/MENU2 button three times. The display will read DRUM CTR RESET. Press the ENTER button. The display will read WARMING UP, and finally ON LINE. The counter is reset!